Hallite H80 Excavator Center Joint Seal Kit ROI Seal Ring

 Product Description                                                                                                                 

Hallite H80 Excavator Center Joint Seal Kit ROI Seal Ring

Hydraulic seal

Commonly used self-sealing compression type hydraulic seals are mainly O-ring seals, round seal rings and square seal rings, etc. They have the advantages of simple structure, easy manufacture, low cost, etc., so they are widely used in hydraulic transmission systems.

Dynamic sealing element and static sealing element. They are typically 10 to 25% radially compressively deformed in the seal groove and create a high initial contact stress on the seal surface to prevent leakage of pressure free liquid.

When the hydraulic cylinder is working, the pressure liquid squeezes the self-sealing compression type hydraulic seal to further deform it, and generates a large pressure with the pressure liquid on the sealing surface, which is strictly speaking pressure. Increased and increased additional contact stress, together with the initial contact stress, prevents leakage of pressurized liquid. However, when the working pressure is greater than 10Mpa, in order to prevent a part of the synthetic rubber self-sealing type compression type hydraulic seal from being squeezed into the sealing gap and being cut off in the reciprocating motion of the hydraulic cylinder, leakage is required, and the self-sealing pressure of the synthetic rubber is required. A compression resin retaining ring is provided on the pressure side of the tight hydraulic seal, such as a nylon retaining ring, a polyoxymethylene retaining ring and a filled PTFE retaining ring. Since the synthetic rubber self-sealing compression type hydraulic seal has a large compression deformation when working, its static friction resistance is particularly large, and it is usually more than twice the dynamic

friction resistance. Such a large static friction resistance in some low-pressure hydraulic transmission systems is bound to cause low-pressure creep and difficult operation, which is why the self-sealing compression type hydraulic seal is rarely used as a dynamic seal.

Pls Contact us for further details and the reply will be sent asap.

Product Show                                                                                                                           

 

 

We also supply all the excavator oil seals and hydraulic seal kits as below:
1. Hydraulic Cylinder Seal kit/Boom Arm Bucket Cylinder Oil Seal Kit
2. Control Valve Oil Seal Kit
3. Main Pump Seal Kit
4. Center Joint Seal kit
5. Swing Motor Seal Kit
6. Travelling Motor Seal Kit
7. Chain Adjuster Seal kit/Track Adjuster Cylinder Seal Kit
8. Gear Pump Seal Kit
9. Remote Control Valve Seal Kit
10. Orings&Oring Kit Box
11. PU Couplings
12. Floating Seals&Seal Group
13. Shaft Oil Seals
14. Hydrauli Cylinder Seals
15. Other Excavator Oil Seals
Pls feel free to contact us for further information. Thank you very much!!